 |
| Quantity: | |
|---|---|
1. It is recommended to use an oven with timing function and cyclic exhaust, so that the steam can be directly pumped to avoid the steam can not be discharged and hinder the complete drying of the graphite boat.
2. After cleaning, the graphite boat should be air showered or blow-dried for at least a period of time to ensure that there are no water drops or water marks on the surface of the boat, and then put it into the oven. Do not put the graphite boat that has just been cleaned directly into the oven.
3. Set the temperature of the oven at 100-120 degrees Celsius, and the running and holding time is 10-12 hours. A fixed drying period can be determined in combination with the production cycle.
▍Maintenance Of Graphite Boat
1. The storage of the graphite boat: the graphite boat should be stored in a dry and clean environment. Due to the interstitial structure of graphite itself, it has a certain degree of adsorption. Moist or polluted environment will make the graphite boat after cleaning and drying easy to be polluted or damp again.
2. The ceramic and graphite parts of the graphite boat components are all fragile materials, and should be avoided during handling or use; if the components are found to be broken, cracked, loose, etc., they should be replaced and re-locked in time.
3. Replacement of graphite craft stuck points: According to the frequency and time of use, and the actual shadow area of the battery, the graphite boat craft stuck points should be replaced periodically.
4. It is recommended that graphite boats be numbered management, and regular cleaning, drying, maintenance, and inspection should be carried out, and managed by special personnel; to maintain the stability of the management and use of graphite boats. The graphite boat that is cleaned as a whole should be regularly replaced with ceramic components.
5. When the graphite boat is maintained, it is recommended that the components, boat pieces and process stuck points be provided by the graphite boat supplier, so as to avoid damage during the replacement process due to the inability of the component accuracy to match the original boat.
▍FAQ：
Q1. Are you a factory or trading company?
A: We are an ISO9001-Qualified processing manufacturer with 70000 square meter factory area.
Q2. Can you introduce your main products?
A: Sure.
Jiangxi Ningheda New Material Co., Ltd. mainly produces graphite products, we can offer customized shape according to customers' specific demand. Our Graphite Products, including molded graphite products, isostatic graphite products, extruded graphite products, vibration moulding graphite products. We can produce a lot of graphite products, like graphite mold, graphite casting die, graphite heating element, graphite crucible, graphite sealing ring, graphite tube, graphite rod, graphite edm, graphite block etc.
Q3.What is your MOQ?
A: 1 piece (graphite block, graphite rod, graphite box, graphite mold, graphite material, graphite seal ring, graphite crucible, graphite products, graphite sintering mold, graphite heater etc.).
Q4. Can you offer free samples?
A: Yes, usually we can offer free sample for you to check the quality, but do not afford express charge.
However, if the sample is expensive, like large size, we has to charge basic cost of the sample. And Samples delivery time will be about 3-10 days.
Q5. When can I get the price?
A: We will reply you within 24 hours after getting your detailed requirements, like size, quantity etc. If it is an urgent order, you can call us directly.
Q6. Do you accept OEM or ODM orders?
A: Yes, of course, most of our products are customized.
Q7. How about your delivery time?
A: Usually 7 to 25 days after payment.
Q8. Do you test your goods before delivery?
A: Yes, we have strict inspection system.
Q9. How do you keep long-term business relationship?
A: 1. Good quality and competitive price to ensure mutual benefit;
2. Quick reply and sincere service.
Notice: When you contact us, please show us the accurate drawing and your selected graphite material information, then we can offer you accurate price.
1. It is recommended to use an oven with timing function and cyclic exhaust, so that the steam can be directly pumped to avoid the steam can not be discharged and hinder the complete drying of the graphite boat.
2. After cleaning, the graphite boat should be air showered or blow-dried for at least a period of time to ensure that there are no water drops or water marks on the surface of the boat, and then put it into the oven. Do not put the graphite boat that has just been cleaned directly into the oven.
3. Set the temperature of the oven at 100-120 degrees Celsius, and the running and holding time is 10-12 hours. A fixed drying period can be determined in combination with the production cycle.
▍Maintenance Of Graphite Boat
1. The storage of the graphite boat: the graphite boat should be stored in a dry and clean environment. Due to the interstitial structure of graphite itself, it has a certain degree of adsorption. Moist or polluted environment will make the graphite boat after cleaning and drying easy to be polluted or damp again.
2. The ceramic and graphite parts of the graphite boat components are all fragile materials, and should be avoided during handling or use; if the components are found to be broken, cracked, loose, etc., they should be replaced and re-locked in time.
3. Replacement of graphite craft stuck points: According to the frequency and time of use, and the actual shadow area of the battery, the graphite boat craft stuck points should be replaced periodically.
4. It is recommended that graphite boats be numbered management, and regular cleaning, drying, maintenance, and inspection should be carried out, and managed by special personnel; to maintain the stability of the management and use of graphite boats. The graphite boat that is cleaned as a whole should be regularly replaced with ceramic components.
5. When the graphite boat is maintained, it is recommended that the components, boat pieces and process stuck points be provided by the graphite boat supplier, so as to avoid damage during the replacement process due to the inability of the component accuracy to match the original boat.
▍FAQ：
Q1. Are you a factory or trading company?
A: We are an ISO9001-Qualified processing manufacturer with 70000 square meter factory area.
Q2. Can you introduce your main products?
A: Sure.
Jiangxi Ningheda New Material Co., Ltd. mainly produces graphite products, we can offer customized shape according to customers' specific demand. Our Graphite Products, including molded graphite products, isostatic graphite products, extruded graphite products, vibration moulding graphite products. We can produce a lot of graphite products, like graphite mold, graphite casting die, graphite heating element, graphite crucible, graphite sealing ring, graphite tube, graphite rod, graphite edm, graphite block etc.
Q3.What is your MOQ?
A: 1 piece (graphite block, graphite rod, graphite box, graphite mold, graphite material, graphite seal ring, graphite crucible, graphite products, graphite sintering mold, graphite heater etc.).
Q4. Can you offer free samples?
A: Yes, usually we can offer free sample for you to check the quality, but do not afford express charge.
However, if the sample is expensive, like large size, we has to charge basic cost of the sample. And Samples delivery time will be about 3-10 days.
Q5. When can I get the price?
A: We will reply you within 24 hours after getting your detailed requirements, like size, quantity etc. If it is an urgent order, you can call us directly.
Q6. Do you accept OEM or ODM orders?
A: Yes, of course, most of our products are customized.
Q7. How about your delivery time?
A: Usually 7 to 25 days after payment.
Q8. Do you test your goods before delivery?
A: Yes, we have strict inspection system.
Q9. How do you keep long-term business relationship?
A: 1. Good quality and competitive price to ensure mutual benefit;
2. Quick reply and sincere service.
Notice: When you contact us, please show us the accurate drawing and your selected graphite material information, then we can offer you accurate price.
+86-795-4605907 
sales@nhdcarbon.com 
No. 966 of Tiangong South Avenue, High-tech Industrial Park, Fengxin County, Yichun City, Jiangxi Province, China.
